Z206317-0B PAGE 1 ©2012 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com 09123
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
TM
ENVIRONMENTAL SENSORS
INSTALLATION GUIDE
Digital Pressure Transducer
Dry Media
PXR PXR
DIMENSIONS
NOTICE
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classified locations.
• Read and understand the instructions before installing
this product.
• Turn off all power supplying equipment before working on it.
• The installer is responsible for conformance to all applicable codes.
PRODUCT IDENTIFICATION
Installer’s Specifications
Media Compatibility Dry air or inert gas
Input Power 12-30VDC, or 24VAC nominal; 2-wire: 20mA max.; 3-wire: 30mA max.
Output Field-selectable: 2-wire, loop-powered 4-20mA
(DC only, clipped and capped), or 3-wire 0-5V/0-10V*
Pressure Ranges:
PXR: 01 Unidirectional: 0.1/0.25/0.5/1.0” W.C. F.S., switch selectable
Bidirectional: ±0.1/±0.25/±0.5/±1.0” W.C. F.S., switch selectable
Unidirectional: 25 Pa/50 Pa/100 Pa/250 Pa, F.S., switch selectable
Bidirectional: ±25 Pa/±50 Pa/±100 Pa/±250 Pa, F.S., switch selectable
PXR: 02 Unidirectional: 1.0/2.5/5.0/10” W.C. F.S., switch selectable
Bidirectional: ±1.0/±2.5/±5.0/±10” W.C. F.S., switch selectable
Unidirectional: 0.250 kPa/0.500 kPa/1.000 kPa/2.500 kPa, F.S., switch selectable
Bidirectional: ±0.250 kPa/±0.500 kPa/±1.000 kPa/±2.500 kPa, F.S., switch selectable
Response Time Standard: T95 in 20 sec, Fast: T95 in 2 sec, jumper selectable
Mode Unidirectional or bidirectional, jumper selectable
Display (option) Signed 3½ digit LCD, indicates pressure, overrange indicator
Proof Pressure 3 psid (20.6 kPa)
Burst Pressure 5 psid (34.5 kPa)
Accuracy ±1% F.S. of selected range (combined linearity and hysteresis)
Temperature Eect 1” (250 Pa) range: 0.05%/°C; 10” (2.5 kPa) range: 0.01%/°C
(Relative to 25°C) 0° to 50°C (32° to 122°F)
Zero Drift (1-year) 1” (250 Pa) range: 2.0% max.; 10” (2.5 kPa) range: 0.5% max.
Zero Adjust Pushbutton auto-zero and digital input (2-pos terminal block)
Operating Environment 0° to 60°C (32° to 140°F); 0 to 90% RH non-condensing
Fittings Barb, 0.205” (5.2 mm) and 0.125” (3.2 mm) o.d.
EMC Conformance: Emissions EN 61000-6-3:2007 and A1:2011 Class B. Radiated Immunity EN
61000-4-3:2008; Conducted Immunity EN61000-4-6:2008; EFT EN61000-4-4:2004; Magnetic
Field Immunity EN61000-4-8:2001.
EMC Special Note: Connect this product to a DC distribution network or an AC/DC power adaptor
with proper surge protection (EN 61000-6-1:2007 specication requirements).
* Minimum input voltage for 4-20 mA operation: 250 Ω loop = 13 VDC; 500 Ω loop = 19 VDC
Note: If using this device with a Siemens Universal input controller in mA mode,
contact Veris Technical Support for application assistance.
Local Display
L = LCD Display
X = No Display
NIST
N = NIST
X = None
Response
= Selectable
Range
01 = 0-1”W.C./0-250Pa
02 = 0-10”W.C./0-2.500kPa
PXR
S
QUICK INSTALL
Observe precautions for handling static sensitive
devices to avoid damage to the circuitry that
is not covered under the factory warranty.
1. Mount the PXR onto DIN rail.
2. Congure the tubing for dierential or static pressure monitoring.
3. Wire the PXR.
4. Congure the jumpers for operation.
2.5 “
(63 mm)
3.1”
(78 mm)
2.9 “
(72 mm)
2.5 “
(63 mm)
Comments to this Manuals